Licensed reseller
Construction Supplies Australia is a licensed reseller of Fosroc and Dulux. For structural remediation, the chemicals are Fosroc. For the paint, the brand is Dulux.
Repair mortars, crack injection, structural grouts, primers and concrete protection coatings come from the Fosroc range we stock. Repaint, Dulux AcraTex and specified Dulux coatings on steel are quoted as Dulux. We supply the materials. The contractor applies them.
Fosroc
Spalled concrete, exposed reinforcement, cracks, baseplates and the primers those repairs depend on. 135 catalogue lines sit under the five systems below. Order the pack size, or send the bill of quantities for a project quote.
In Australia the Fosroc range is sold under licence by Parchem, part of DuluxGroup. CSA is a licensed reseller of that range, not the brand owner.
Dulux
The finish over a repair, a facade texture system, and a Dulux protective system on steel. Colour, sheen and the full coating build are quoted from the specification.
Dekguard and Nitocote are Fosroc concrete coatings. They are not a Dulux paint. If the specification names Dulux, we supply Dulux.
Fosroc systems
Hand-applied and flowable repair mortars for spalled concrete, exposed reinforcement and structural reinstatement.
36 catalogue linesEpoxy and polyurethane injection resins, packers and equipment for structural crack repair and water stopping.
13 catalogue linesShrinkage-compensated cementitious and epoxy grouts for baseplates, machine bases, precast connections and rail fixings.
31 catalogue linesSubstrate primers, bonding agents and reinforcement primers that make the system above them work.
33 catalogue linesAnti-carbonation, chemical-resistant and decorative protective coatings that extend the service life of concrete.
22 catalogue linesPre-applied, post-applied, torch-on and liquid membranes for below-ground tanking, podiums, decks and wet areas.
PVC, hydrophilic and injectable waterstops for construction and movement joints in water-retaining and below-ground structures.
Polyurethane, polysulphide, silicone and hybrid sealants for movement joints, facades, floors and fire-rated penetrations.
Closed-cell foam, cross-linked foam and compressible fillers that form the joint and set the depth for the sealant above.
Waterproofing, waterstops, joint sealants and joint fillers are Fosroc as well. Curing compounds and industrial floor coatings are on the systems index when the job is new concrete or a floor, not a structural repair.
Dulux
Send the specification. We price the Dulux product it names, in the colour and pack size the job needs. Performance, spreading rate and recoat time stay on the current Dulux data sheet.
Once the Fosroc repair is faired and cured, the decorative finish on concrete, masonry and rendered walls is usually a Dulux exterior or interior system. Colour, sheen and litres come from the specification.
Quoted. The online catalogue does not list the Dulux colour library. Send the colour name, the product and the area, and the trade desk prices the packs.
AcraTex is the Dulux texture and membrane range used on rendered and concrete facades, including elastomeric top coats over remedial patching. It is a paint system, not a Fosroc repair mortar.
Two AcraTex packs are listed online (Top Coat Pastel 15 L and Roll On 00 15 L). Other grades and colours are quoted.
Where the engineer specifies a Dulux protective system on structural steel, the build is the one on the data sheet: surface preparation, primer, intermediate coat and topcoat. A spray can is not that system.
The specified system is quoted. Dulux Metalshield aerosols are listed for minor priming and touch-up only.
These are the Dulux lines in the catalogue today: Metalshield aerosols and two AcraTex packs. They are not the full paint range. A remedial repaint or a specified protective system is still a quote.
Fosroc for the repair. Dulux for the paint. 11 Fosroc system guides are already on the site if you want to narrow the product first.
