Stramit Monoclad®
Stramit Monoclad®. Versatile trapezoidal cladding for roofing and walling. 29 mm ribs spaced at 190 mm centres, screw-fixed, suitable for 2° minimum roof pitch.
- BMT Range
- 0.42 mm BMT
- Category
- roofing
- Available Colours
- Various
- 29 mm ribs at 190 mm centres
- 2° minimum roof pitch
- 0.42 and 0.48 BMT to G550
- Monolap® long-run compatibility
- COLORBOND, ZINCALUME and MagnaFlow
POA
Price on Application
This product is custom-cut, large-volume or project-specific. Submit a quote request and our trade desk will respond within 2 business hours.
Overview
Stramit Monoclad® is a trapezoidal ribbed cladding profile for roofing and walling on industrial, commercial and rural buildings. The 29 mm rib geometry provides spanning capacity and water-carrying performance with conventional pierced fixing. Compatible with the Stramit Monolap® lap joint system for long-run single-plane roofs.
Per Stramit specifications: 0.42 and 0.48 BMT to AS 1397 G550, minimum roof slope 2°, available Australia-wide with lead times varying by location. CSA supplies Monoclad® in COLORBOND, ZINCALUME and MagnaFlow finishes with lengths and availability confirmed at quote or order acceptance.
Technical Specifications
| Product Name | Stramit Monoclad® Roof and Wall Cladding |
|---|---|
| Application | Roof and Wall Cladding |
| Profile | Monoclad |
| Finish | steel |
| Base metal thickness (BMT) | 0.42 mm |
| Cover width | 762.00 mm |
| Colour | Various |
| Unit of measure | LM |
| Material | steel |
| Steel base | BlueScope COLORBOND, ZINCALUME or MagnaFlow steel |
|---|---|
| Finishes | COLORBOND, COLORBOND Ultra, ZINCALUME, MagnaFlow, galvanised |
| Yield strength | G550 (550 MPa minimum yield) |
| Coating | AM100 / AZ150 metallic alloy coating |
| Steel standard | AS 1397:2021 |
| Paint standard | AS/NZS 2728:2013 |
Compliance
Standards & Certifications
High-tensile steel base
Cold-rolled from G550 steel (550 MPa minimum yield strength) with a metallic alloy coating, manufactured by BlueScope to the relevant Australian Standard.
AS 1397:2021
COLORBOND prepainted finish
COLORBOND prepainted steel finishes are manufactured to the Australian Standard for prepainted steel, incorporating Activate technology for corrosion resistance and (in core colours) Thermatech solar reflectance.
AS/NZS 2728:2013
Non-combustible material
Steel made by BlueScope has an Ignitability, Spread-of-Flame and Heat-Evolved index of 0 (zero), so it may be used wherever a non-combustible material is required under the National Construction Code (NCC 2022 C2D10).
AS/NZS 1530.3
Suitable for bushfire-prone areas
Steel roofing and walling can be specified from BAL-12.5 up to BAL-FZ (Flame Zone) using compliant system details under AS 3959 and the NASH Bushfire Standard, which the NCC references as a Deemed-to-Satisfy solution.
AS 3959 / NASH
Designed and installed to standard
Metal roofing and wall cladding is designed, tested and installed to the metal roofing/cladding code, with wind actions assessed to the wind loading standard.
AS 1562.1 / AS/NZS 1170.2
Datasheets, Guides & Certificates
Manufacturer documentation for specification and compliance. Links open the original source documents.
Supplier technical datasheet and specification reference.
Deemed-to-Satisfy compliance documentation for specification under the National Construction Code.
Check eligibility and register a COLORBOND / ZINCALUME steel warranty for your project.
CSIRO AS/NZS 1530.3 test results confirming Spread-of-Flame index of 0 for BlueScope steel.
Colours Available
Use Cases
- Industrial warehouse cladding
- Commercial building walls
- Agricultural shed walls
- Rural storage buildings
- Roofing on moderate pitches
Applicable Standards
- AS/NZS1170.1:2002
- AS/NZS2728:2013
- AS/NZS1170.2:2021
FAQ
Stramit Monoclad® — Frequently Asked Questions
What is the rib spacing on Monoclad?
Monoclad has 29 mm ribs spaced at 190 mm centres across a 762 mm cover width, giving good span and water-carrying performance for roofing and walling.
Can Monoclad be used for long-run roofing?
Yes. Monoclad is compatible with the Stramit Monolap lap-joint system, which allows long, single-plane roofs without traditional end laps.
More from Stramit
View allNeed Stramit Monoclad® for your job?
Order catalogue lines, request a custom-cut order, or open a trade account for volume pricing and net-30 terms.