Abrasive Rubber

Abrasive Rubber Block - Multi-Grit Rubber Abrasive Blocks High-quality rubber abrasive blocks available in three grit grades - coarse, medium, and fine - for cleaning, surface preparation, finishing, and rust or coating removal. The resilient rubber body is evenly impregnated with abrasive grit, so each block cuts evenly throughout its life. These blocks are ideal for metalwork, glass, ceramics, plastics, and painted surfaces, and can be used dry or with lubricants (water, paraffin, solvent) for enhanced finish control. Available Blocks Options: 60 Grit (Coarse); Colour: Blue ; Typical Use: Aggressive material removal - rust/scale stripping, paint or old coating removal, heavy surface prep 120 Grit (Medium); Colour: Grey ; Typical Use: General purpose surface smoothing, rust & oxidation removal, preparing surfaces for finer finishing 240 Grit (Fine) Colour: Brown ; Typical Use: Light finishing, removing fine surface blemishes, preparing for polishing or coating Specification Material: Resilient rubber impregnated with abrasive grit Dimensions: Width ≈ 50 mm; Height ≈ 19 mm; Length ≈ 76 mm Abrasive Distribution: Grit is uniformly distributed throughout the block for a consistent finish over the full block life Use Modes: Dry sanding/cleaning, or wet / lubricated sanding using water, paraffin, solvents, etc. for improved finish and reduced heat/dust Customisation: Blocks can be cut or shaped for specialised tasks or tight spaces Typical Applications Removing rust, oxidation, scale, or old coatings from metal surfaces Preparing metal, glass, ceramic, or painted substrates before painting, powder-coating, or polishing Blending edges, smoothing welds, deburring, and refining surfaces Light finishing and scratch removal on stainless steel, aluminium, painted metal, plastic, or ceramic surfaces Workshops, maintenance, fabrication, glazing, and general-purpose surface preparation and cleaning tasks