Click photo to enlarge
Fosroc RENDEROC HB40 PLUS 20KG
Fosroc RENDEROC HB40 PLUS 20KG from Fosroc is supplied by Construction Supplies Australia in the Construction Chemicals Repair And Bonding range. This line is listed with SKU CSA-97718C4CBBD1.
- Category
- Construction Chemicals Repair And Bonding
- Compatible with concrete strength in the range 25 to 50 MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long term dimensional stability
- Low permeability to potentially damaging water, CO2 and chloride ions
- High build formulation - fewer applications of product
- High resistivity - provides increased durability
- Excellent bond to SSD concrete substrates ? no separate primer required in most circumstances - refer to Substrate Priming section of TDS
- Can be applied using wet-spray process - providing faster high build repairs
- Pre-bagged to overcome site-batched variations - only the site addition of clean water required
- Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
- Complies to EN 1504-3 Class R3
Overview
Fosroc RENDEROC HB40 PLUS 20KG from Fosroc is supplied by Construction Supplies Australia in the Construction Chemicals Repair And Bonding range. This line is listed with SKU CSA-97718C4CBBD1.
Fosroc lists Fosroc RENDEROC HB40 PLUS 20KG for trade and project orders. The selling unit is shown on this page. Order the catalogue line online or request a quote for project quantities.
It sits in the Construction Chemicals Repair And Bonding range. Check the specifications on this page before ordering, including colour, size and pack quantity where they apply.
Technical Specifications
| Unit of measure | Metric |
|---|---|
| CSA SKU | CSA-97718C4CBBD1 |
| barcode | 9300611603494 |
Datasheets, Guides & Certificates
Manufacturer documentation for specification and compliance. Links open the original source documents.
Use Cases
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 10-40mm required, and a required strength is between 25-50 Mpa. Higher build & improved application compared to HB40
Applicable Standards
- EN 1504-3
Complete the order
Recommended for this job
Priced catalogue lines related to this product, including relevant fixings, sealants and materials. Every item shown here can be added to your cart.
Need Fosroc RENDEROC HB40 PLUS 20KG for your job?
Order catalogue lines, request a custom-cut order, or send a trade account enquiry for repeat purchasing and account pricing.