No photo
Joint Backer Rod 15mm x 50m
Joint Backer Rod
Closed-cell PE backer rod, 15mm x 50m. Sets sealant depth in movement joints. Order with the joint sealant, not as a substitute for it.
- Category
- Sealants Tapes And Backer Rod
SKU CSA-FAF673113A86
POA
Price on Application
This option is quoted. Submit a request and the trade desk will check the product, quantity and delivery details.
Overview
Joint Backer Rod is a closed-cell polyethylene foam rod used to set sealant depth and prevent three-sided adhesion in movement joints. This coil is 15mm diameter by 50 metres. AS 4667 joint design needs a bond-breaker at the back of the joint. The rod diameter should be about 25 percent larger than the joint width so it compresses and stays in place. Sealant depth is then controlled by the rod, not by how much the gunner can push in. Use with Construction PU Joint Sealant or Hybrid Facade Sealant. Do not use open-cell rod in wet joints unless the specification says so. Catalogue line. Diameter is confirmed against the joint schedule on the quote.
Technical Specifications
| Chemistry | Closed-cell polyethylene foam |
|---|---|
| Pack | 15mm x 50m |
| Order unit | roll |
| Profile | Backer rod |
| Unit of measure | roll |
| CSA SKU | CSA-FAF673113A86 |
| pack size | 15mm x 50m |
| seed source | csa-seed:sealants-range-2026-09 |
| subcategory | joint-accessory |
| installation | Prepare joints to AS 4667. Clean, dry, sound substrates. Use the stated primer where the system requires it. Confirm colour and chemistry against the specification before opening the pack. |
Applicable Standards
- AS 4667
Complete the order
Recommended for this job
Priced catalogue lines related to this product, including relevant fixings, sealants and materials. Every item shown here can be added to your cart.
Need Joint Backer Rod 15mm x 50m for your job?
Order catalogue lines, request a custom-cut order, or send a trade account enquiry for repeat purchasing and account pricing.